AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |
Back to Blog
Smartapp multiple bulbs3/6/2023 Īre you having trouble with setup? Have other questions? Here are some useful FAQs:Ī1: Monster Smart devices only work on a 2.4GHz Wi-Fi network. It is recommended to pair your smart device indoors, in a location closer to your router, before installation.Do you know your Wi-Fi network name and password? Write it down now if it’s hard to remember.For easier pairing, turn on Bluetooth and enable location services to quickly find nearby smart devices.Before setup, make sure your phone or tablet is connected to the 2.4GHz Wi-Fi network that your smart device will be placed on.To setup your Monster Smart device, please follow these tips: Your 5GHz network is best for things like your streaming and media devices. ![]() Why? Your 2.4GHz Wi-Fi network has a longer rage and better coverage within the home, better signal penetration through solid objects like walls, and is ideal for connected smart devices that don’t require much data or speed. That’s how to wire a lamp with multiple bulbs.Monster Smart devices only work on a 2.4GHz Wi-Fi network for initial setup. ![]() Reassemble the plug completely and that’s it. After dismantling, thread the new cord through the plug’s core and attach its ends to the screw terminals. We will do this by taking apart the old one. It’s very simple, just twist them so that they intertwine and put a wire nut on them.Īgain – it all depends on how many bulbs you intend to connect. Connecting all the cordsĪfter you have connected the cords to all the individual sockets, it is necessary to connect the cords themselves to the main cord so that everything is fully functional. Repeat the same thing for the other sockets. You can first unscrew the screw, then wrap the bare part of the cord right at the very edge of the top of the screw, and then twist it. You will do this by winding the cord around the screw located on the socket itself. The most complicated part is over, now you just need to connect the cords to the sockets of each individual bulb to make them functional. Once you’ve pushed the cords through to the bulb itself, you can make the job easier by grabbing the cord with pliers on the other side and pulling it toward you so that it emerges on the surface. ![]() The main cord must go from the very base of the lamp, while you pass the others (depending on the number of bulbs) to the socket itself for each individual bulb. Routing the cordsĪll cords must be passed through the lamp itself. Strip some of the outer insulation from both ends of each wire. The length of the individual cords depends on your lamp and the distance to the sockets. If there are 2 bulbs, then you must have 3 cords: 2 that go to the bulbs and one main one that goes to the base. Preparing a new lamp cordĭepending on how many bulbs you have, you need to prepare more cords. ![]() You will usually achieve this by removing all the screws. In this step, the most important thing is to remove the main lamp cord that goes all the way to the base of the lamp, and along with it, the smaller cables that go to the socket. Open the cap on the wire connection housing (often it’s a simple pop-off). The first and most important thing is to turn off and completely disassemble the lamp, which primarily includes removing the lampshade. Here’s how to wire a lamp with multiple bulbs: 1. Anyway, it’s not as complicated as it seems. If you have more bulbs, you will need more cords.
0 Comments
Read More
Leave a Reply. |